Hexagon metrics shared by the map model and every mesh builder. 更多...

#include <HexMetrics.h>

静态 Public 成员函数
static constexpr float	outerRadius () noexcept
	Radius of a hex cell in world units.

static constexpr float	innerRadius () noexcept
	Inner radius of a hex cell.

static constexpr float	innerDiameter () noexcept
	Width of one hex column.

static constexpr float	rowSpacing () noexcept
	Row spacing between hex rows.

static HexVec3	corner (HexDirection direction, float scale=1.f) noexcept
	Outer corner `direction` of a unit hex, scaled by `scale`.

static HexVec3	firstCorner (HexDirection d) noexcept
	First (counter-clockwise) outer corner of `direction`.

static HexVec3	secondCorner (HexDirection d) noexcept
	Second (clockwise) outer corner of `direction`.

static HexVec3	firstSolidCorner (HexDirection d) noexcept
	First solid corner of `direction`.

static HexVec3	secondSolidCorner (HexDirection d) noexcept
	Second solid corner of `direction`.

static HexVec3	solidEdgeMiddle (HexDirection d) noexcept
	Midpoint of the solid edge of `direction`.

static HexVec3	firstWaterCorner (HexDirection d) noexcept
	First water corner of `direction`.

static HexVec3	secondWaterCorner (HexDirection d) noexcept
	Second water corner of `direction`.

static HexVec3	bridge (HexDirection d) noexcept
	Bridge vector from the solid edge of `direction` to the neighbour.

static HexVec3	waterBridge (HexDirection d) noexcept
	Bridge vector from the water edge of `direction` to the neighbour.

static HexVec3	terraceLerp (HexVec3 a, HexVec3 b, int step) noexcept
	Interpolates a position along a terraced slope.

static HexVec3	terraceLerpWeights (HexVec3 a, HexVec3 b, int step) noexcept
	Interpolates terrain weights along a terraced slope.

static HexVec3	wallLerp (HexVec3 near, HexVec3 far) noexcept
	Position of the midpoint of a wall between two elevations.

static HexVec3	wallThicknessOffset (HexVec3 near, HexVec3 far) noexcept
	Half-thickness offset applied to a wall segment.

static float	elevationY (int elevation) noexcept
	Y coordinate of a cell's elevation surface.

static float	streamBedY (int elevation) noexcept
	Y coordinate of a river bed inside a cell.

static float	waterSurfaceY (int waterLevel) noexcept
	Y coordinate of a water surface at `waterLevel`.

static float	solidRadius () noexcept
	Distance from a cell centre to its nearest edge midpoint.

静态 Public 属性
static constexpr float	kOuterToInner = 0.866025404f
	Ratio of the outer radius to the inner radius.

static constexpr float	kInnerToOuter = 1.f / kOuterToInner
	Ratio of the inner radius to the outer radius.

static constexpr float	kDefaultOuterRadius = 10.f
	Default outer (corner) radius of one hex cell.

static constexpr float	kElevationStep = 3.f
	Vertical distance between two elevation levels.

static constexpr int	kTerracesPerSlope = 2
	Terraces generated per slope.

static constexpr int	kTerraceSteps = kTerracesPerSlope * 2 + 1
	Terrace interpolation steps per slope (`terracesPerSlope * 2 + 1`).

static constexpr float	kHorizontalTerraceStepSize = 1.f / static_cast<float>(kTerraceSteps)
	Horizontal fraction of one terrace interpolation step.

static constexpr float	kVerticalTerraceStepSize = 1.f / static_cast<float>(kTerracesPerSlope + 1)
	Vertical fraction of one terrace interpolation step.

static constexpr float	kSolidFactor = 0.8f
	Factor of the solid, uniform-colour hex inscribed in a cell.

static constexpr float	kBlendFactor = 1.f - kSolidFactor
	Factor of the blend region between two neighbouring cells.

static constexpr float	kWaterFactor = 0.6f
	Factor of the solid water surface inscribed in a cell.

static constexpr float	kWaterBlendFactor = 1.f - kWaterFactor
	Factor of the water blend region between two cells.

static constexpr float	kCellPerturbStrength = 4.f
	Strength of the XZ position perturbation.

static constexpr float	kElevationPerturbStrength = 1.5f
	Strength of the vertical elevation perturbation.

static constexpr float	kStreamBedElevationOffset = -1.75f
	Elevation offset of a carved river bed relative to the cell.

static constexpr float	kWaterElevationOffset = -0.5f
	Elevation offset of a water surface relative to the water level.

static constexpr float	kRiverSurfaceScale = 0.6f
	Width of the river channel.

static constexpr float	kWallHeight = 4.f
	Height of a city/farm wall.

static constexpr float	kWallYOffset = -1.f
	Vertical wall offset; negative so walls do not float above the surface.

static constexpr float	kWallThickness = 0.75f
	Wall thickness.

static constexpr float	kWallElevationOffset = kVerticalTerraceStepSize
	Wall elevation offset, matching the vertical terrace step size.

static constexpr int	kChunkSizeX = 5
	Chunk size in the X dimension.

static constexpr int	kChunkSizeZ = 5
	Chunk size in the Z dimension.

static constexpr int	kMinElevation = -4
	Minimum editable elevation.

static constexpr int	kMaxElevation = 8
	Maximum editable elevation.

static constexpr float	kOuterRadius = kDefaultOuterRadius
	Outer (corner) radius of one hex cell in world units.

static constexpr float	kInnerRadius = kDefaultOuterRadius * kOuterToInner
	Inner (edge) radius of one hex cell in world units.

static constexpr float	kInnerDiameter = kInnerRadius * 2.f
	Width of one hex column.

static constexpr float	kRowSpacing = kDefaultOuterRadius * 1.5f
	Row spacing between hex rows.

详细描述

Hexagon metrics shared by the map model and every mesh builder.

The layout matches the Catlike Coding "Hex Map" reference project: pointy-top hexes on the XZ plane, +X east, +Z north, odd rows shifted half a cell to the right, Y up. All radii are expressed in world units and are compile-time constants, so a different scale needs a different build rather than a setter.

在文件 HexMetrics.h 第 111 行定义.

成员函数说明

◆ bridge()

static HexVec3 eve::hexmap::HexMetrics::bridge ( HexDirection d )

inlinestaticnoexcept

Bridge vector from the solid edge of direction to the neighbour.

在文件 HexMetrics.h 第 214 行定义.

引用了 corner(), d, kBlendFactor , 以及 eve::hexmap::next().

◆ corner()

static HexVec3 eve::hexmap::HexMetrics::corner	(	HexDirection	direction,
		float	scale = `1.f`
	)

inlinestaticnoexcept

Outer corner direction of a unit hex, scaled by scale.

在文件 HexMetrics.h 第 183 行定义.

引用了 direction, eve::hexmap::E, kInnerRadius, kOuterRadius, eve::hexmap::NE, eve::hexmap::NW, r, scale, eve::hexmap::SE, eve::hexmap::SW , 以及 eve::hexmap::W.

被这些函数引用 bridge(), firstCorner(), firstSolidCorner(), firstWaterCorner(), secondCorner(), secondSolidCorner(), secondWaterCorner(), solidEdgeMiddle() , 以及 waterBridge().

◆ elevationY()

static float eve::hexmap::HexMetrics::elevationY ( int elevation )

inlinestaticnoexcept

Y coordinate of a cell's elevation surface.

在文件 HexMetrics.h 第 265 行定义.

引用了 elevation , 以及 kElevationStep.

被这些函数引用 eve::hexmap::HexMap::cellPosition() , 以及 eve::hexmap::HexMap::pickCell().

◆ firstCorner()

static HexVec3 eve::hexmap::HexMetrics::firstCorner ( HexDirection d )

inlinestaticnoexcept

First (counter-clockwise) outer corner of direction.

在文件 HexMetrics.h 第 198 行定义.

引用了 corner() , 以及 d.

◆ firstSolidCorner()

static HexVec3 eve::hexmap::HexMetrics::firstSolidCorner ( HexDirection d )

inlinestaticnoexcept

First solid corner of direction.

在文件 HexMetrics.h 第 202 行定义.

引用了 corner(), d , 以及 kSolidFactor.

◆ firstWaterCorner()

static HexVec3 eve::hexmap::HexMetrics::firstWaterCorner ( HexDirection d )

inlinestaticnoexcept

First water corner of direction.

在文件 HexMetrics.h 第 210 行定义.

引用了 corner(), d , 以及 kWaterFactor.

◆ innerDiameter()

static constexpr float eve::hexmap::HexMetrics::innerDiameter ( )

inlinestaticconstexprnoexcept

Width of one hex column.

在文件 HexMetrics.h 第 178 行定义.

引用了 kInnerDiameter.

被这些函数引用 eve::hexmap::HexCoordinates::fromWorldPosition().

◆ innerRadius()

static constexpr float eve::hexmap::HexMetrics::innerRadius ( )

inlinestaticconstexprnoexcept

Inner radius of a hex cell.

在文件 HexMetrics.h 第 176 行定义.

引用了 kInnerRadius.

被这些函数引用 eve::hexmap::buildRiverMesh(), eve::hexmap::buildRoadMesh() , 以及 solidRadius().

◆ outerRadius()

static constexpr float eve::hexmap::HexMetrics::outerRadius ( )

inlinestaticconstexprnoexcept

Radius of a hex cell in world units.

在文件 HexMetrics.h 第 174 行定义.

引用了 kOuterRadius.

被这些函数引用 eve::hexmap::HexCoordinates::fromWorldPosition().

◆ rowSpacing()

static constexpr float eve::hexmap::HexMetrics::rowSpacing ( )

inlinestaticconstexprnoexcept

Row spacing between hex rows.

在文件 HexMetrics.h 第 180 行定义.

引用了 kRowSpacing.

◆ secondCorner()

static HexVec3 eve::hexmap::HexMetrics::secondCorner ( HexDirection d )

inlinestaticnoexcept

Second (clockwise) outer corner of direction.

在文件 HexMetrics.h 第 200 行定义.

引用了 corner(), d , 以及 eve::hexmap::next().

◆ secondSolidCorner()

static HexVec3 eve::hexmap::HexMetrics::secondSolidCorner ( HexDirection d )

inlinestaticnoexcept

Second solid corner of direction.

在文件 HexMetrics.h 第 204 行定义.

引用了 corner(), d, kSolidFactor , 以及 eve::hexmap::next().

◆ secondWaterCorner()

static HexVec3 eve::hexmap::HexMetrics::secondWaterCorner ( HexDirection d )

inlinestaticnoexcept

Second water corner of direction.

在文件 HexMetrics.h 第 212 行定义.

引用了 corner(), d, kWaterFactor , 以及 eve::hexmap::next().

◆ solidEdgeMiddle()

static HexVec3 eve::hexmap::HexMetrics::solidEdgeMiddle ( HexDirection d )

inlinestaticnoexcept

Midpoint of the solid edge of direction.

在文件 HexMetrics.h 第 206 行定义.

引用了 corner(), d, kSolidFactor , 以及 eve::hexmap::next().

被这些函数引用 eve::hexmap::buildRiverMesh() , 以及 eve::hexmap::buildRoadMesh().

◆ solidRadius()

static float eve::hexmap::HexMetrics::solidRadius ( )

inlinestaticnoexcept

Distance from a cell centre to its nearest edge midpoint.

在文件 HexMetrics.h 第 278 行定义.

引用了 innerRadius() , 以及 kSolidFactor.

◆ streamBedY()

static float eve::hexmap::HexMetrics::streamBedY ( int elevation )

inlinestaticnoexcept

Y coordinate of a river bed inside a cell.

在文件 HexMetrics.h 第 269 行定义.

引用了 elevation, kElevationStep , 以及 kStreamBedElevationOffset.

被这些函数引用 eve::hexmap::buildRiverMesh().

◆ terraceLerp()

static HexVec3 eve::hexmap::HexMetrics::terraceLerp	(	HexVec3	a,
		HexVec3	b,
		int	step
	)

inlinestaticnoexcept

Interpolates a position along a terraced slope.

参数

a	Start position (low side).
b	End position (high side).
step	Terrace step in `[0, kTerraceSteps]`.

在文件 HexMetrics.h 第 229 行定义.

引用了 a, b, h, kHorizontalTerraceStepSize, kVerticalTerraceStepSize, step, v , 以及 eve::hexmap::HexVec3::x.

被这些函数引用 eve::hexmap::EdgeVertices::terraceLerp().

◆ terraceLerpWeights()

static HexVec3 eve::hexmap::HexMetrics::terraceLerpWeights	(	HexVec3	a,
		HexVec3	b,
		int	step
	)

inlinestaticnoexcept

Interpolates terrain weights along a terraced slope.

Lerp.

在文件 HexMetrics.h 第 239 行定义.

引用了 a, b, h, kHorizontalTerraceStepSize, eve::hexmap::lerp() , 以及 step.

◆ wallLerp()

static HexVec3 eve::hexmap::HexMetrics::wallLerp	(	HexVec3	near,
		HexVec3	far
	)

inlinestaticnoexcept

Position of the midpoint of a wall between two elevations.

在文件 HexMetrics.h 第 246 行定义.

引用了 kWallElevationOffset, kWallYOffset, v , 以及 eve::hexmap::HexVec3::x.

◆ wallThicknessOffset()

static HexVec3 eve::hexmap::HexMetrics::wallThicknessOffset	(	HexVec3	near,
		HexVec3	far
	)

inlinestaticnoexcept

Half-thickness offset applied to a wall segment.

在文件 HexMetrics.h 第 255 行定义.

引用了 dx, dz, kWallThickness, s , 以及 eve::hexmap::HexVec3::x.

◆ waterBridge()

static HexVec3 eve::hexmap::HexMetrics::waterBridge ( HexDirection d )

inlinestaticnoexcept

Bridge vector from the water edge of direction to the neighbour.

在文件 HexMetrics.h 第 218 行定义.

引用了 corner(), d, kWaterBlendFactor , 以及 eve::hexmap::next().

◆ waterSurfaceY()

static float eve::hexmap::HexMetrics::waterSurfaceY ( int waterLevel )

inlinestaticnoexcept

Y coordinate of a water surface at waterLevel.

在文件 HexMetrics.h 第 273 行定义.

引用了 kElevationStep, kWaterElevationOffset , 以及 waterLevel.

被这些函数引用 eve::hexmap::buildWaterMesh().

类成员变量说明

◆ kBlendFactor

constexpr float eve::hexmap::HexMetrics::kBlendFactor = 1.f - kSolidFactor

staticconstexpr

Factor of the blend region between two neighbouring cells.

在文件 HexMetrics.h 第 132 行定义.

被这些函数引用 bridge().

◆ kCellPerturbStrength

constexpr float eve::hexmap::HexMetrics::kCellPerturbStrength = 4.f

staticconstexpr

Strength of the XZ position perturbation.

在文件 HexMetrics.h 第 138 行定义.

被这些函数引用 eve::hexmap::HexNoise::perturb().

◆ kChunkSizeX

constexpr int eve::hexmap::HexMetrics::kChunkSizeX = 5

staticconstexpr

Chunk size in the X dimension.

在文件 HexMetrics.h 第 156 行定义.

被这些函数引用 eve::hexmap::buildFogMesh(), eve::hexmap::buildRiverMesh(), eve::hexmap::buildRoadMesh(), eve::hexmap::buildWaterMesh(), eve::hexmap::HexMap::chunkCell(), eve::hexmap::HexMap::chunkCenter(), eve::hexmap::loadHexMap(), eve::procgen::registerHexTerrainAlgorithms() , 以及 eve::hexmap::HexMap::reset().

◆ kChunkSizeZ

constexpr int eve::hexmap::HexMetrics::kChunkSizeZ = 5

staticconstexpr

Chunk size in the Z dimension.

在文件 HexMetrics.h 第 158 行定义.

被这些函数引用 eve::hexmap::buildFogMesh(), eve::hexmap::buildRiverMesh(), eve::hexmap::buildRoadMesh(), eve::hexmap::buildWaterMesh(), eve::hexmap::HexMap::chunkCell(), eve::hexmap::HexMap::chunkCenter(), eve::hexmap::loadHexMap(), eve::procgen::registerHexTerrainAlgorithms() , 以及 eve::hexmap::HexMap::reset().

◆ kDefaultOuterRadius

constexpr float eve::hexmap::HexMetrics::kDefaultOuterRadius = 10.f

staticconstexpr

Default outer (corner) radius of one hex cell.

在文件 HexMetrics.h 第 118 行定义.

◆ kElevationPerturbStrength

constexpr float eve::hexmap::HexMetrics::kElevationPerturbStrength = 1.5f

staticconstexpr

Strength of the vertical elevation perturbation.

在文件 HexMetrics.h 第 140 行定义.

被这些函数引用 eve::hexmap::HexNoise::elevationPerturb().

◆ kElevationStep

constexpr float eve::hexmap::HexMetrics::kElevationStep = 3.f

staticconstexpr

Vertical distance between two elevation levels.

在文件 HexMetrics.h 第 120 行定义.

被这些函数引用 elevationY(), eve::hexmap::HexMap::pickCell(), streamBedY() , 以及 waterSurfaceY().

◆ kHorizontalTerraceStepSize

constexpr float eve::hexmap::HexMetrics::kHorizontalTerraceStepSize = 1.f / static_cast<float>(kTerraceSteps)

staticconstexpr

Horizontal fraction of one terrace interpolation step.

在文件 HexMetrics.h 第 126 行定义.

被这些函数引用 terraceLerp() , 以及 terraceLerpWeights().

◆ kInnerDiameter

constexpr float eve::hexmap::HexMetrics::kInnerDiameter = kInnerRadius * 2.f

staticconstexpr

Width of one hex column.

在文件 HexMetrics.h 第 169 行定义.

被这些函数引用 innerDiameter().

◆ kInnerRadius

constexpr float eve::hexmap::HexMetrics::kInnerRadius = kDefaultOuterRadius * kOuterToInner

staticconstexpr

Inner (edge) radius of one hex cell in world units.

在文件 HexMetrics.h 第 167 行定义.

被这些函数引用 corner() , 以及 innerRadius().

◆ kInnerToOuter

constexpr float eve::hexmap::HexMetrics::kInnerToOuter = 1.f / kOuterToInner

staticconstexpr

Ratio of the inner radius to the outer radius.

在文件 HexMetrics.h 第 116 行定义.

◆ kMaxElevation

constexpr int eve::hexmap::HexMetrics::kMaxElevation = 8

staticconstexpr

Maximum editable elevation.

在文件 HexMetrics.h 第 162 行定义.

被这些函数引用 eve::hexmap::generateSphereMap(), eve::hexmap::HexSphereMap::pickCell(), eve::hexmap::HexMap::pickCell(), eve::hexmap::HexMap::setElevation(), eve::hexmap::HexSphereMap::setElevation(), eve::hexmap::HexMap::setWaterLevel() , 以及 eve::hexmap::HexSphereMap::setWaterLevel().

◆ kMinElevation

constexpr int eve::hexmap::HexMetrics::kMinElevation = -4

staticconstexpr

Minimum editable elevation.

在文件 HexMetrics.h 第 160 行定义.

被这些函数引用 eve::hexmap::generateSphereMap(), eve::hexmap::HexMap::pickCell(), eve::hexmap::HexMap::setElevation() , 以及 eve::hexmap::HexSphereMap::setElevation().

◆ kOuterRadius

constexpr float eve::hexmap::HexMetrics::kOuterRadius = kDefaultOuterRadius

staticconstexpr

Outer (corner) radius of one hex cell in world units.

在文件 HexMetrics.h 第 165 行定义.

被这些函数引用 corner(), outerRadius() , 以及 eve::hexmap::HexMap::pickCell().

◆ kOuterToInner

constexpr float eve::hexmap::HexMetrics::kOuterToInner = 0.866025404f

staticconstexpr

Ratio of the outer radius to the inner radius.

在文件 HexMetrics.h 第 114 行定义.

◆ kRiverSurfaceScale

constexpr float eve::hexmap::HexMetrics::kRiverSurfaceScale = 0.6f

staticconstexpr

Width of the river channel.

在文件 HexMetrics.h 第 146 行定义.

被这些函数引用 eve::hexmap::buildRiverMesh().

◆ kRowSpacing

constexpr float eve::hexmap::HexMetrics::kRowSpacing = kDefaultOuterRadius * 1.5f

staticconstexpr

Row spacing between hex rows.

在文件 HexMetrics.h 第 171 行定义.

被这些函数引用 rowSpacing().

◆ kSolidFactor

constexpr float eve::hexmap::HexMetrics::kSolidFactor = 0.8f

staticconstexpr

Factor of the solid, uniform-colour hex inscribed in a cell.

在文件 HexMetrics.h 第 130 行定义.

被这些函数引用 eve::hexmap::buildRoadMesh(), firstSolidCorner(), secondSolidCorner(), solidEdgeMiddle() , 以及 solidRadius().

◆ kStreamBedElevationOffset

constexpr float eve::hexmap::HexMetrics::kStreamBedElevationOffset = -1.75f

staticconstexpr

Elevation offset of a carved river bed relative to the cell.

在文件 HexMetrics.h 第 142 行定义.

被这些函数引用 streamBedY().

◆ kTerracesPerSlope

constexpr int eve::hexmap::HexMetrics::kTerracesPerSlope = 2

staticconstexpr

Terraces generated per slope.

在文件 HexMetrics.h 第 122 行定义.

◆ kTerraceSteps

constexpr int eve::hexmap::HexMetrics::kTerraceSteps = kTerracesPerSlope * 2 + 1

staticconstexpr

Terrace interpolation steps per slope (terracesPerSlope * 2 + 1).

在文件 HexMetrics.h 第 124 行定义.

◆ kVerticalTerraceStepSize

constexpr float eve::hexmap::HexMetrics::kVerticalTerraceStepSize = 1.f / static_cast<float>(kTerracesPerSlope + 1)

staticconstexpr

Vertical fraction of one terrace interpolation step.

在文件 HexMetrics.h 第 128 行定义.

被这些函数引用 terraceLerp().

◆ kWallElevationOffset

constexpr float eve::hexmap::HexMetrics::kWallElevationOffset = kVerticalTerraceStepSize

staticconstexpr

Wall elevation offset, matching the vertical terrace step size.

在文件 HexMetrics.h 第 154 行定义.

被这些函数引用 wallLerp().

◆ kWallHeight

constexpr float eve::hexmap::HexMetrics::kWallHeight = 4.f

staticconstexpr

Height of a city/farm wall.

在文件 HexMetrics.h 第 148 行定义.

◆ kWallThickness

constexpr float eve::hexmap::HexMetrics::kWallThickness = 0.75f

staticconstexpr

Wall thickness.

在文件 HexMetrics.h 第 152 行定义.

被这些函数引用 wallThicknessOffset().

◆ kWallYOffset

constexpr float eve::hexmap::HexMetrics::kWallYOffset = -1.f

staticconstexpr

Vertical wall offset; negative so walls do not float above the surface.

在文件 HexMetrics.h 第 150 行定义.

被这些函数引用 wallLerp().

◆ kWaterBlendFactor

constexpr float eve::hexmap::HexMetrics::kWaterBlendFactor = 1.f - kWaterFactor

staticconstexpr

Factor of the water blend region between two cells.

在文件 HexMetrics.h 第 136 行定义.

被这些函数引用 waterBridge().

◆ kWaterElevationOffset

constexpr float eve::hexmap::HexMetrics::kWaterElevationOffset = -0.5f

staticconstexpr

Elevation offset of a water surface relative to the water level.

在文件 HexMetrics.h 第 144 行定义.

被这些函数引用 waterSurfaceY().

◆ kWaterFactor

constexpr float eve::hexmap::HexMetrics::kWaterFactor = 0.6f

staticconstexpr

Factor of the solid water surface inscribed in a cell.

在文件 HexMetrics.h 第 134 行定义.

被这些函数引用 firstWaterCorner() , 以及 secondWaterCorner().

该类的文档由以下文件生成:

src/modules/hexmap/HexMetrics.h

静态 Public 成员函数

静态 Public 属性

详细描述

成员函数说明

◆ bridge()

◆ corner()

◆ elevationY()

◆ firstCorner()

◆ firstSolidCorner()

◆ firstWaterCorner()

◆ innerDiameter()

◆ innerRadius()

◆ outerRadius()

◆ rowSpacing()

◆ secondCorner()

◆ secondSolidCorner()

◆ secondWaterCorner()

◆ solidEdgeMiddle()

◆ solidRadius()

◆ streamBedY()

◆ terraceLerp()

◆ terraceLerpWeights()

◆ wallLerp()

◆ wallThicknessOffset()

◆ waterBridge()

◆ waterSurfaceY()

类成员变量说明

◆ kBlendFactor

◆ kCellPerturbStrength

◆ kChunkSizeX

◆ kChunkSizeZ

◆ kDefaultOuterRadius

◆ kElevationPerturbStrength

◆ kElevationStep

◆ kHorizontalTerraceStepSize

◆ kInnerDiameter

◆ kInnerRadius

◆ kInnerToOuter

◆ kMaxElevation

◆ kMinElevation

◆ kOuterRadius

◆ kOuterToInner

◆ kRiverSurfaceScale

◆ kRowSpacing

◆ kSolidFactor

◆ kStreamBedElevationOffset

◆ kTerracesPerSlope

◆ kTerraceSteps

◆ kVerticalTerraceStepSize

◆ kWallElevationOffset

◆ kWallHeight

◆ kWallThickness

◆ kWallYOffset

◆ kWaterBlendFactor

◆ kWaterElevationOffset

◆ kWaterFactor